| Brand | RW Energy |
| Model NO. | Stacked energy storage battery |
| Energy storage capacity | 4.8kWh |
| Cell quality | Class B |
| Parallel number | 6 sets |
| Series | Residential energy storage |
Stacked energy storage battery
Peculiarity：
High energy density.
Equipped with BMS battery management system, longer cycle life.
Beautiful appearance; Free stack combination, easy to install.
The panel integrates a variety of interfaces, supports multiple protocols, and ADAPTS to most photovoltaic inverters and energy storage converters.
Can be customized adjustment management battery charging and discharging strategy.
Modular design, easy maintenance.
Technical parameter：
Product model |
S48100 |
|
Battery type |
LiFePO4 3.2V 100AH |
|
Battery capacity |
4.8kWh |
5.12kWh |
Rated discharge current |
50A |
50A |
Maximum discharge current |
100A |
100A |
Voltage range |
40.5~54V |
43.2~57.6V |
Standard battery unit voltage |
48V |
51.2V |
Maximum DC charging voltage |
54V |
57.6V |
Maximum charging current |
50A |
50A |
Single Cluster Battery Pack |
15S1P |
16S1P |
Maximum output power |
5KW |
5KW |
Communication interface |
RJ45X2 RS485/232X2 CANX2 |
|
Power battery interface |
BAT+ X2 BAT- X2 |
|
Battery life |
Loop 3000~6000次@DOD 80%/25℃/0.5C |
|
Maximum number of parallel machines |
15 |
|
Cooling mode |
Natural cooling |
|
Protection |
Over (under) voltage protection/over current protection/over temperature protection/over discharge protection/short circuit protection |
|
Operating environment |
Temperature: -30~50℃ Humidity: 20~95RH% |
|
Maximum working altitude |
2500m(> 2000m load reduction required) |
|
Fire protection installation |
Heptafluoropropane gas fire extinguishing device |
|
Class of protection |
IP20 |
|
Communication mode |
Default: RS485/RS232/CAN Optional: WiFi/4G/ Bluetooth |
|
NOTE:
The A-class cell can charge and discharge 6000 times, and the B-class cell can charge and discharge 3000 times, and the default discharge ratio is 0.5C.
Class A cell warranty 60 months, Class B cell warranty 30 months.
What is a stacked energy storage battery？
Energy storage battery systems are an important part of modern power grids and renewable energy systems. They can store electrical energy during periods of low power demand and release electrical energy during peak demand periods, thereby balancing grid loads and improving energy utilization efficiency.
Modular design:Stacked energy storage batteries usually adopt modular design. Each module is an independent energy storage unit that can be used alone or in combination with other modules.
Flexible expansion:Users can increase or reduce the number of modules according to actual needs, and easily expand or reduce the capacity of the energy storage system.
Unified control system:The entire energy storage system is managed through a unified control system to ensure coordinated work between various modules.
-
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions（1）1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025 -
The difference between transmission and distribution linesTransmission lines and distribution lines are both used to carry electrical power from one location to another. However, they differ significantly in key aspects such as primary function, voltage levels, phase configuration, and conductor placement. These differences are essential for understanding their distinct roles in the power system.The Difference Between Transmission and Distribution Line is given below in the tabulated form.Electricity generation is a critical component of the power systEdwiin09/04/2025 -
Ensuring Reliability: A Deep Dive into Transformer MaintenanceIntroductionElectric transformers are the backbone of modern power distribution systems, silently enabling the reliable delivery of electricity to homes, businesses, and industries. As these critical assets age and the demand for uninterrupted power grows, the importance of diligent transformer maintenance has never been greater. This essay explores the essential role of transformer maintenance, highlighting the value of proactive care, the impact of advanced diagnostic technologies, and the traVziman09/03/2025
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical mRW Energy04/22/2025 -
Interference Generated by Frequency Converters and SolutionsA frequency converter is a device used to adjust the speed and voltage of an electric motor by changing the motor's supply frequency to achieve speed control. However, during operation, frequency converters generate some interference that can negatively impact other electronic equipment and the power grid. Therefore, it's necessary to adopt solutions to mitigate this interference.Electromagnetic Interference (EMI): When adjusting the motor's supply frequency, frequency converters generate higRW Energy08/21/2025
